DIY Knuckle Ring with Wrapping and Hammering Technique

This project will include hammering, you will need to have a metal block and a chisel hammer.

Tools you need:
1. 18g copper wire-60mm/piece
2. Ring Mandrel
3. Chisel Hammer
4. Nylon Hammer
5. Metal Block

Step 1.

Cut 60mm of copper wire and flatten both end by hammering on it. Be sure to hammer evenly on wires.

Step 2.
File and smoothen both end so it will have no sharp edges.

Step 3.

Mold it on ring mandrel and hammer wires into ring sizes desired. (This length is for a size 3 ring, cut longer wire if you like a bigger ring size.)

It is perfect to wear them alone or stack them up together with other rings.

Enjoy!

Til then,

~Maggie~